home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
LOTTORTS
/
PTD1.LZH
/
PTD1.EXE
/
TRAINING.ERR
< prev
next >
Wrap
Text File
|
1992-12-01
|
16KB
|
866 lines
#
1001 Gstack overflow. Not enough memory or an endless loop.
#
1002 Heap overflow. Not enough memory or an endless loop.
#
1003 Requested block is too big (max 0xFFF0 bytes).
Internal error which should not be caused by PTD.
#
1004 Mismatch between freed blocks size and internal record.
Internal error which should not be caused by PTD.
#
1005 Attempt to release already released block.
Internal error which should not be caused by PTD.
#
1006 Heap signature overwritten
Internal error which should not be caused by PTD.
#
1008 Memory initialization failure.
This indicates a severe shortage of memory. The program is unable
to start execution.
#
1009 General protection fault
#
1010 Stack overflow.
#
1020 Trail overflow.
#
1030 Arithmetic overflow in real operation.
#
1031 Arithmetic overflow.
#
1032 Division by zero.
#
1041 Assert to a fact declared as determ, where facts already exist.
#
1101 Attempt to open an already open file.
#
1103 Attempt to assign output device to a file that is not in writemode.
#
1106 Invalid operation on device.
#
1108 Illegal device or path.
#
1110 File too big, or not enough memory for file.
#
1111 Wrong number of bytes read from file.
Files may be damaged, use backups
#
1112 Not able to write correct number of bytes to file.
This is probably caused by a full disk.
#
1116 Failure in while running program.
Either COMMAND.COM can not be found,
or program files can not be found.
#
1117 Failure in while running program.
Lack of memory. Remove any resident programs.
#
1314 Unable to create database.
#
1315 Unable to open database.
#
1317 Database marked as invalid.
#
1318 Unable to delete database.
#
1401 Program files are damaged.
Use backups.
#
1402 Program files are damaged.
Use backups.
#
1403 Program files are damaged.
Use backups.
#
1404 Program files are damaged.
Use backups.
#
1405 Program files are damaged.
Use backups.
#
1406 Program files are damaged.
Use backups.
#
1407 Program files are damaged.
Use backups.
#
1408 Program files are damaged.
Use backups.
#
1409 Program files are damaged.
Use backups.
#
1410 Program files are damaged.
Use backups.
#
1411 Program files are damaged.
Use backups.
#
1501 Editor text buffer full.
#
1602 Result string cannot be bigger than 64K.
#
1701 BGI graphics not installed.
#
1702 Graphics hardware not detected.
#
1703 Device driver file not found.
#
1704 Invalid device driver file.
#
1705 Not enough memory to load driver.
#
1706 Out of memory in scan fill.
#
1707 Out of memory in flood fill.
#
1708 Font file not found.
#
1709 Not enough memory to load font.
#
1710 Invalid graphics mode for selected driver.
#
1711 Graphics error.
#
1712 Graphics I/O error.
#
1713 Invalid font file.
#
1714 Invalid font number.
#
1715 Invalid device number.
#
7001 Invalid function number
#
7002 File not found
#
7003 Path not found
#
7004 Out of handles
#
7005 Access denied
#
7006 Invalid handle
#
7007 Memory control blocks destroyed
#
7008 Insufficient memory
#
7009 Invalid memory block address
#
7010 Invalid environment
#
7011 Invalid format
#
7012 Invalid access code
#
7013 Invalid data
#
7014 Unknown unit
#
7015 Invalid disk drive
#
7016 Cannot remove current directory
#
7017 Not same device
#
7018 No more files
#
7019 Disk write-protected
#
7020 Unknown unit
#
7021 Drive not ready
#
7022 Unknown command
#
7023 Data error (CRC)
#
7024 Bad request structure length
#
7025 Seek error
#
7026 Unknown type of medium
#
7027 Sector not found
#
7028 Printer out of paper
#
7029 Write fault
#
7030 Read fault
#
7031 General failure
#
7032 Sharing violation
#
7033 Lock violation
#
7034 Invalid disk change
#
7035 FCB unavailable
#
7036 Sharing buffer exceeded
#
7050 Unsupported network request
#
7051 Remote machine not listening
#
7052 Duplicate name on network
#
7053 Network name not found
#
7054 Network busy
#
7055 Device no longer exists on network
#
7056 NetBIOS command limit exceeded
#
7057 Error in network adapter hardware
#
7058 Incorrect response from network
#
7059 Unexpected network error
#
7060 Remote adapter incompatible
#
7061 Print queue full
#
7062 Insufficient memory for print file
#
7063 Print file canceled
#
7064 Network name deleted
#
7065 Network access denied
#
7066 Incorrect network device type
#
7067 Network name not found
#
7068 Network limit exceeded
#
7069 NetBIOS session limit exceeded
#
7070 File sharing temporarily paused
#
7071 Network request not accepted
#
7072 Print or disk redirection paused
#
7080 File already exists
#
7082 Cannot make directory
#
7083 Fail on Int 24H (critical error)
#
7084 Too many redirections
#
7085 Duplicate redirection
#
7086 Invalid password
#
7087 Invalid parameter
#
7088 Network device fault
#
7089 No process slots available
#
7090 System error
#
7091 Timer service table overflow
#
7092 Timer service table duplicate
#
7093 No limits to work on
#
7095 Interupted system call
#
7100 Open semaphore limit exceeded
#
7101 Exclusive semaphore already owned
#
7102 DosCloseSem Found semaphore set
#
7103 Too many exclusive semaphore requests
#
7104 Operation invalid at interrupt time
#
7105 Semaphore owner terminated
#
7106 Semaphore limit exceeded
#
7107 Insert drive B disk into drive A
#
7108 Drive locked by another process
#
7109 Write on pipe with no reader
#
7110 Open/create failed due to explicit fail command
#
7111 Buffer too small
#
7112 Disk is full
#
7113 No more search handles
#
7114 Invalid target handle for DosDupHandle
#
7115 Bad user virtual address
#
7116 Error on display write or keyboard read
#
7117 Invalid DosDevIOCtl category
#
7118 Invalid value for verify flag
#
7119 Driver does not support DosDevIOCtl
#
7120 Invalid function called
#
7121 Timed out waiting for semaphore
#
7122 Insufficient data in buffer
#
7123 Invalid character or bad filename
#
7124 Unimplemented information level
#
7125 No volume label found
#
7126 Invalid module handle
#
7127 Procedure not found in module
#
7128 No child processes found
#
7129 Child processes still running
#
7130 Invalid handle operation for direct disk access
#
7131 Cannot seek to negative offset
#
7132 Cannot seek on pipe or device
#
7133 Drive has previously joined drives
#
7134 Drive is already joined
#
7135 Drive is already substituted
#
7136 Drive is not joined
#
7137 Drive is not substituted
#
7138 Cannot join to joined drive
#
7139 Cannot substitute to substituted drive
#
7140 Cannot join to substituted
#
7141 Cannot substitute to joined drive
#
7142 Drive is busy
#
7143 Cannot join or substitute drive to directory on same drive
#
7144 Must be subdirectory of root
#
7145 Joined directory must be empty
#
7146 Path is already used in substitute
#
7147 Path is already used in join
#
7148 Path is being used by another process
#
7149 Cannot join or substitute drive having directory that is target of previous substitute
#
7150 System trace error
#
7151 DosMuxSemWait errors
#
7152 Systems limit on DosMuxSemWait calls exceeded
#
7153 Invalid list format
#
7154 Volume label too big
#
7155 Cannot create another TCB
#
7156 Signal refused
#
7157 Segment is discarded
#
7158 Segment was not locked
#
7159 Bad tread ID address
#
7160 Bad environment pointer
#
7161 Bad pathname for DosExecPgm
#
7162 Signal already pending
#
7163 Unknown medium
#
7164 No more threads available
#
7165 Monitors not supported
#
7180 Invalid segment number
#
7181 Invalid call gate
#
7182 Invalid ordinal
#
7183 Shared segment or system semaphore already exists
#
7184 No child process running
#
7185 Child process is still alive
#
7186 Invalid flag number
#
7187 semaphore does not exist
#
7188 Invalid stating code segment
#
7189 Invalid stack segment
#
7190 Invalid module type
#
7191 Wrong EXE file header
#
7192 Invalid EXE file,LINK errors
#
7193 Invalid EXE format
#
7194 Iterated data exceeds 64 KB
#
7195 Invalid minimum allocation size
#
7196 Invalid dynamic link from ring 2 segment
#
7197 IOPL not enabled in CONFIG.SYS
#
7198 Invalid segment descriptor privilege limit
#
7199 Automatic data segment exceeds 64 KB
#
7200 Ring 2 segment must be movable
#
7201 Relocation chain exceeds segment limit
#
7202 Infinite loop in relocation chain
#
7203 Environment variable not found
#
7204 Not current country
#
7205 NO process whit handler to receive signal
#
7206 Filename or extension too long
#
7207 Ring too stack in use
#
7208 Meta expansin too long
#
7209 Invalid signal number
#
7210 Inactive thread
#
7211 File system information not available
#
7212 Locked error
#
7213 Bad dynamic link
#
7214 Too many modules
#
7215 Nesting not allowed
#
7216 Cannot shrink ring 2 stack
#
7230 Nonexistent pipe or invalid operation
#
7231 Specified pipe is busy
#
7232 No data on nonblocking pipe read
#
7233 Pipe disconnected by server
#
7234 Additional data is available
#
7240 Network session was canceled
#
7262 Stack too large
#
7303 Invalid process ID
#
7304 Invalid priority level increment
#
7305 Not a descendant process
#
7306 Requestor not Task Manager
#
7307 Invalid priority class
#
7308 Invalid scope
#
7309 Invalid thread ID
#
7310 Cannot shrink DosSubSet segment
#
7311 Out of memory(DosSubAlloc)
#
7312 Invalid block specified(DosSubFree)
#
7313 Bad size parameter
#
7314 Bad flag parameter(DosSubSet)
#
7315 Invalid segment selector
#
7316 Message too long for buffer
#
7317 Message ID number not found
#
7318 Unable to access message file
#
7319 Invalid message file format
#
7320 Invalid insertion variable count
#
7321 Unable to perform function
#
7322 Unable to wake up
#
7323 Invalid semaphore handle
#
7324 No timers available
#
7326 Invalid timer handle
#
7327 Date or time invalid
#
7328 Internal system error
#
7329 Current queue name does not exist
#
7330 Current process is not queue owner
#
7331 Current process owns queue
#
7332 Duplicate queue name
#
7333 Queue record does not exist
#
7334 Inadequate queue memory
#
7335 Invalid queue name
#
7336 Invalid queue priority parameter
#
7337 Invalid queue handle
#
7338 Queue link not found
#
7339 Queue memory error
#
7340 Previous queue record was at end of queue
#
7341 Process does not have access to queue
#
7342 Queue is empty
#
7343 Queue name does not exist
#
7344 Queues not initialized
#
7345 Unable to access queues
#
7346 Unable to add new queue
#
7347 Unable to initialize queues
#
7349 Invalid Vio function replaced
#
7350 Invalid pointer to parameter
#
7355 Unsupported screen mode
#
7356 Invalid cursor width value
#
7358 Invalid row value
#
7359 Invalid column value
#
7366 Invalid wait flag setting
#
7367 Screen not previously locked
#
7369 Invalid session ID
#
7370 No session available
#
7371 Session not found
#
7372 Title cannot be changed
#
7373 Invalid parameter(Kbd)
#
7375 Invalid wait parameter
#
7376 Invalid length for keyboard
#
7377 Invalid echo mode mask
#
7378 Invalid input mode mask
#
7379 Invalid monitor parameters
#
7380 Invalid device name string
#
7381 Invalid device handle
#
7382 Buffer too small
#
7383 Buffer empty
#
7384 Data record too large
#
7386 Mouse handle invalid or closed
#
7389 Invalid display mode parameters
#
7391 Invalid entry point
#
7392 Invalid function mask
#
7394 Pointer drawn
#
7395 Invalid frequency for DosBeep
#
7396 Cannot find COUNTRY.SYS file
#
7397 Cannot open COUNTRY.SYS file
#
7398 Country code not found
#
7399 Information truncated to fit buffer
#
7400 Selected type does not exist
#
7401 Selected type not in file
#
7402 Vio function for Task Manager only
#
7403 Invalid string length(Vio)
#
7404 VioDeRegister not allowed
#
7405 Popup screen not allocated
#
7406 Pop-up already on screen
#
7407 Kdb function for Task Manager only
#
7408 Invalid ASCIIZ string length(Kdb)
#
7409 Invalid function replacement mask
#
7410 KbdRegister not allowed
#
7411 KbdDeRegister not allowed
#
7412 Mou function for Task Manager only
#
7413 Invalid ASCIIZ string length(Mou)
#
7414 Invalid replacement mask
#
7415 MouRegister not allowed
#
7416 MouDeRegister not allowed
#
7417 Invalid action specified
#
7418 INIT called more than one
#
7419 Screen group number not found
#
7420 Caller is not shell
#
7421 Invalid parameter(Vio)
#
7422 Save/restore already owned
#
7423 Thread unblocked by VioModeUndo or VioSavRedrawUndo
#
7425 Caller not Task Manager
#
7426 VioRegister Not allowed
#
7427 No VioModeWait thread exists
#
7428 No VioSavRedrawWait thread exists
#
7429 Function invalid in background
#
7430 Function not allowed during pop-up
#
7431 Caller is not the base shell
#
7432 Invalid status requested
#
7433 No-wait parameter out of bounds
#
7434 Cannot lock screen
#
7435 Invalid wait parameter
#
7436 Invalid Vio handle
#
7438 Invalid length for Vio function
#
7439 Invalid Kdb handle
#
7440 Out of Kbd handles
#
7441 Cannot create logical Keyboard
#
7442 Code page load failed
#
7443 Invalid code page ID
#
7445 Keyboard focus required
#
7446 Caller already has focus
#
7447 Keyboard subsystem is busy
#
7448 Invalid code page
#
7449 Cannot get keyboard focus
#
7450 Session is not selectable
#
7451 Parent/child session not in foreground
#
7452 Not parent of specified child
#
7453 Invalid session start mode
#
7454 Invalid session start option
#
7455 Invalid session bonding option
#
7456 Invalid session select option
#
7457 Session started in background
#
7458 Invalid session stop option
#
7459 Reserved parameter not 0
#
7460 Session parent process already exists
#
7461 Invalid data length
#
7462 Parent session not bound
#
7463 Retry request block allocation
#
7464 Unavailable for detached process(Kbd)
#
7465 Unavailable for detached process(Vio)
#
7466 Unavailable for detached process(Mou)
#
7467 No font available to support mode
#
7468 User font active
#
7469 Invalid code page specified
#
7470 System displays do not support code page
#
7471 Current display does not support code page
#
7472 Invalid code page
#
7473 Code page list is too small
#
7474 Code page not moved
#
7475 Mode switch initialization error
#
7476 Code page not found
#
7477 Internal error
#
7478 Invalid session start trace indicator
#
7479 Vio internal Resource error
#
7480 Vio shell initialization error
#
7481 No Task Manager hard errors
#
7482 DosSetCp unable to set display or keyboard code page
#
7483 Error during Vio pop-up
#
7484 Critical section overflow
#
7485 Critical section underflow
#
7486 Reserved parameter is not 0
#
7487 Bad physical address
#
7488 No selectors requested
#
7489 Not enough GDT selectors available
#
7490 Not a GDT selector
#
7491 Invalid program type
#
7492 Invalid program control
#
7493 Invalid program inheritance option
#
7494 Vio function not allowed in PM window
#
7495 Function not supported in non PM screen group
#
7496 Vio shield already owned
#
7497 Vio handle exhausted
#
7498 Vio error occured, details sent to error log
#
7499 Invalid display context
#
7500 Kbd input not available
#
7501 Mou input not available
#
7502 Invalid mouse handle
#
7503 Invalid debugging parameters
#
7504 Kbd function not allowed in PM window
#
7505 Mou function not allowed in PM window
#
7506 Invalid icon file
#
10001 Wrong version of database files. Use CONVERT.EXE first.
#
10002 Printer Is Not Functioning. Please Check.
#